所有提交的电磁系统将被重定向到在线手稿提交系统。作者请直接提交文章在线手稿提交系统各自的杂志。

p型铜铁矿的TCO薄膜CuCrO2: Mg与传统热射频溅射和超速的激光退火


14th在材料科学与工程国际会议和展览

2017年11月13 - 15,|拉斯维加斯,美国

Barnabe、y Thimont L Presmanes我Sinnarasa和p . Tailhades

保罗•Sabatier CIRIMAT-Universite de图卢兹三世法国

ScientificTracks抽象:启J垫。Sci >

DOI:10.4172 / 2321 - 6212 c1 - 011

文摘

目前缺乏可比组合的p型材料的高导电性和透明性,建立n - TCO。这个技术差距对许多限制光电设备上的概念和性能需要一个透明的孔注入,收集或传输层。p-TCO,首先需要存款合成材料作为一个透明衬底上薄膜。这已经发表使用大范围的沉积条件和工艺。然而,主要p-TCO性能仍需改进,总之,达到n-TCO同行。第二,适当的衬底温度的控制要求和可能成为一个重要的问题对于现实应用程序因为传统或柔性基板是必需的。CuCrO2的增长:Mg铜铁矿石英衬底上薄膜由射频溅射首次报道在这工作。沉积导致纳米晶体相。铜铁矿特征衍射峰获得作为热处理的函数。导电率进行优化,直到1.6 S cm - 1光学透光率63%的可见范围。 The transport properties were analyzed by Seebeck and Hall measurements, integrated spectrophotometry and optical simulation. The second part of this work is focused on the post laser annealing which was carried out by varying the scan speed, power and number of pass of the laser beam on films deposited on various polymer, conventional glass and quartz substrates. The laser annealing affects the microstructure, sheet resistance, and optical transmittance of the CuCrO2:Mg thin films. From the present work it can then be concluded that the preparation of efficient p-type TCO thin films based on Delafossite structure could be obtained at temperatures compatible with the use of cheap substrates such as flexible polymer or conventional glass slides.

传记

Barnabe是CIRIMAT教授实验室(混合氧化物化合价研究小组),保罗Sabatier大学,法国。他收到了材料化学博士学位大学德Caen-Basse诺曼底在1999年(法国)。他在西北大学举行了一个博士后职位,埃文斯顿(美国),2000年。他目前的研究兴趣主要集中在功能金属氧化物粉末、陶瓷和薄膜由PVD技术。他第一次在TEM表征巨磁阻水锰矿然后移动到复杂氧化物与新光电性质。在过去的十年中,他开发了透明导电氧化物(n - p型)和二氧化碳气敏层检测气急败坏的氧化物薄膜。他负责在SEM / TEM /电子探针/西姆斯描述中心r . CASTAING在图卢兹。迄今为止,所有这些作品都导致了63年的出版物,2项专利,80多个通信(hindex = 22日的《纽约时报》援引> 1400)。

全球技术峰会